For the energy storage welding robot, first of all, we should pay attention to the regular inspection work. It's like when we check the power on of the energy storage welding robot to see if its cooling fan rotates smoothly. In fact, we should pay attention to see if there is any abnormal vibration, sound and smell.

The automatic laser welding machine manufacturer explained that next, we should actually observe whether the gas on the energy storage welding robot will leak; whether the joint of the welding wire and the binding on its insulation will loosen or peel off; next, we should actually look at the welding cable and its various Whether there is abnormal heating phenomenon in the wiring part, etc.

Gantry welding machine manufacturers talk about because for the energy storage welding robot, it is actually used for forced air cooling, in this respect, it is actually easier to inhale dust from the surrounding and it will accumulate in our machine. In view of this, we should regularly use the compressed air on the clean and dry surface to blow the dust inside the welding machine.

NC plasma cutting machine manufacturers remind to pay attention to should be regularly to check the wiring parts of the power wiring. In this respect, in fact, it will, to a large extent, include terminals such as the input side and the output side. Of course, it will also include wiring parts with external wiring. When they are rusted, rust should be removed, so as to maintain good contact conductivity.

For the regular maintenance of energy storage welding robot and its inspection, to a great extent, it can reduce the occurrence of welding faults, even if it takes some time and energy, but to a great extent, it can actually prolong the life of welding robot and increase its work to a great extent Efficiency.