Pay attention to the working load during the operation of gantry welding machine

As for the gantry welding machine, its cost is actually high. In view of this, we should take good care of the gantry welding machine in order to achieve the important purpose of prolonging the service life of the mechanical equipment. In addition to reducing the harmful factors, we should also pay attention to the straightness When using the machine, ensure the normal working load.

The manufacturer of the automatic laser welding machine states that for the size and nature of the working load of the gantry welding machine equipment, it actually has a particularly important impact on the loss process of the machine. Generally speaking, for the wear of the parts of gantry welding machine, it will increase proportionally with the increase of load to a certain extent.

CNC plasma cutting machine manufacturers talk about when the load on the parts of gantry welding machine is higher than our average design load, we should pay attention to its wear, in a certain extent, it is bound to intensify. In addition, when other conditions are the same, for a stable load, it is often less wear, less failure and lower life than under dynamic load.

According to the test, we will notice that the engine of the gantry welding machine works under the unstable load, and the comparative results of the engine working under the stable load are analyzed. For the cylinder wear, it will increase several times in a certain degree. The engine working under normal load has a low failure rate and a longer life.

On the contrary, according to the manufacturer's instructions, for the engine of gantry welding machine under overload operation, its failure rate will increase significantly, and its service life will be reduced compared with the design index. In this respect, the mechanical wear of gantry welding machine, which is often in a large range of load variation, is greater than that of continuous and stable mechanical equipment.